ETL 120V LED Wired Electric Dimmer Switch Slide with Switch
The DMS-S3-120N is a slide dimmer switch that provides optimal dimming performance of LED bulbs. This dimmer works with up to 150-Watt of dimmable LED/CFL or 700-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit.
1. Control 700W Halogen/Incandescent, 150W Dimmable LED/CFL.
2. With Sensitivity Dial to make sure steady performance when compatible with different brands light bulbs.
3. Smooth-action slide control for easy precise operation
4. Longer mounting strap increases wall board contact area, eliminating floating installations
5. Full-range dimming, lighting fade up and down smoothly allowing your eyes to adjust to changing light levels.
|Dimmer Style||Slide Dimmer|
|Voltage||120 Volt, 60Hz|
|Special Features||Three Way|
|Power Source||Wired Electric|
|Operating Temperature||0℃ to 40℃|
|Standards & Certifications|
Dimming Range Adjustment
1. Turn dimmer on and move slider down to the bottom.
2. Turn knob clockwise until lowest light level is achieved and light output is stable for all bulbs.
3. Turn dimmer off, then back on to verify bulbs.
4. Turn knob counter-clockwise lightly and do step3 again if all bulbs do not turn on.
5. Once all bulbs are dimming properly, install faceplate.
Wiring the Dimmer
ETL/CETL Slide Dimmer with Switch,120VAC, 60Hz.
1. Q:Can I have a sample order?
A:Yes. we welcome sample order.
2.Q:.Do you have certification of dimmers ?
A:Yes. we have ETL&CUL certifications for dimmers.
3.Q:Could you send me some samples ?
A. No problem,but please pay freight fee.
4.Q:What's your MOQ?
A. If you can do our brand,the MOQ is 1000 pieces.
5.Q:Can you do the design for us?
A. Yes, we have professional designer on structure design, it is easy for us to make new design and make new module for our partners.