Single Pole Dual Technology Low Voltage Wall Mount Occupancy Sensors
Specifications:
MDW-L | |
Power Pack | |
Power Supply | MPP-24 Power Pack (Purchased separately) |
Electrical Specifications | |
Voltage | 22-26VDC/VAC |
Current Consumption | 40mA |
Time Delay | 30 Sec to 30 Mins |
Walk-Through Mode | 3 minutes if no activity after 30 seconds |
Test Mode | 5 seconds at initial power up or DIP switch reset |
PIR Coverage | |
Coverage | 1000ft2 |
Sensitivity Adjustment | Automatic or Low (DIP switch setting) |
Ultrasonic Coverage | |
Coverage | 800-1200ft2 |
Sensitivity Adjustment | Minimum to Maximum (trimpot) |
Frequency | 40kHz |
Environment Specifications | |
Operating Temperature | 32℉-131℉ |
Material Specifications | |
Material | PC |
Standards & Certifications | |
Certification/Listing | UL |
Warranty | 2 Year Limited |
Features:
- Combines PIR and Ultrasonic Technologies to avoid false triggering
- Turn lighting systems on /off based on occupancy and ambient light levels
- Combines numerous operating modes to create an ideal custom control
- “Walk-through” mode can turn lights off after only 3 minutes, if no activity is detected after 30 seconds following an occupancy detection
- Conforms to California Title 24 Requirements
Coverage:
The MDW-L provides an eliptical coverage pattern. The coverage shown repersents walking motion ata mounting height of 10 feet For buliding spaces with lower levels of activity or with obstacles and barriers, coverage size may decrease.
Wiring Diagram:
Make sure that the power has been turned OFF at the circuit breaker.
Connect lead wires as WIRING DIAGRAM: Black lead to Common, Red lead to +24V, Blue lead to Control Out.
Adjustment:
Ultrasonic &PIR Sensiyivity adjustment knob
Default position : Center
Adjustable:25% (Position 1)to 100%(Position 4)
Note: Turn toward the right for greater room space.
Turn toward the left to avoid false alert in smaller room and nera the door way or hert source.
Ambient light level adjustment trimpot
Default position:Daylight (100% at position 4)
Adjustable: Clock wise
1.Q:What is your MOQ?
A:1000 pieces.
2.Q:How long is your production time?
A:30~45 days according to your quantity.
3.Q:Could I put my own logo on it?
A:Sure,customers' logo can be made by laser, engraved, embossed, printing etc.
4.Q:Should I pay extra for logo printing?
A:According to the actual situation,specific products.
5.Q:How about the quality?
A:Acquire the UL and ISO9000 standard.
100% QC in production process and before packaging.
6.Q:If i have my thoughts, can you design according to my idea?
A:Yes,our design teams are professional enough to meet your requirements.